Home     About me     Recipes      Tutorials      Projects     Link Parties      Recipes From Around The World

Saturday 5 January 2013

DIY Patches Cushion

So now it is January I can share some of the Christmas presents I made with you! The first one was this cushion I made for my Dad.


When my Dad was younger, he spent time youth hostelling and hiking in the Yorkshire Dales and the Lake District. Some of the patches he collected were in a drawer and some were sewn onto an old backpack that was thrown out this summer. I salvaged the patches and stole them away, planning to find some way of displaying them for my Dad. 
Int the end I decided to display them on a cushion, framed with a simple piped edging.

You can get patches for so many things these days; sports teams, countries, attraction - so I thought I would post a tutorial in case you have any old patches lying in a drawer clamouring to be displayed in some way or another!

Materials
Backing fabric - I used a plain neutral colour
(sizes depend on the size of your cushion - see below for measurements for a 17x17 cushion)
Bias Binding (I used about 2 metres)
Cord (I used about 2 metres)
Patches
Co-ordinating thread
Double sided tape
Cushion inner

1. Cut a plain piece of fabric the size of your cushion, add 1/2 inch to the height and width 
(e.g. 17 x 17 cushion = 17 1/2 x 17 1/2" fabric). 
Arrange your patches on the fabric - I decided on a fairly symmetrical arrangement with the more unusual shaped badges in the centre. To secure, instead of pins, I used a small piece of double sided tape to hold the badge in place.

2. Sew each badge onto the fabric in co-ordinating thread.



3. Cut out 2 more pieces of fabric 17 1/2 x 12". Hem a long side on each rectangle as shown in the picture. Set aside for later


4. Next, to make your piping, take your bias binding, open it, and sandwich the cord in the middle, pin the bias binding. With a zipper foot, sew down the length of the bias binding , close to the cord. Make sure you use a co-ordinating thread.

Finished piping should look like this

5. With the raw edges matching to the edge of your fabric, pin the bias binding all the way round. Clip the corners as in the pictures to bend it round.



When you get back to the start, trim the bias binding so that there is little excess. Pull 1cm of cord out of one end and cut. Poke the other end into the opposite piping to create a join. This will be stitched up later.


6. Pin one rectangle, right side down on top of the patched fabric


7. Pin the other right side down on top to create an envelope back


8. Using your zipper foot and feeling where the piping is, sew round the cushion, sticking as close to the piping as possible.

9. When you turn the cushion cover the right side out check you have caught all of the piping all the way round. With a needle and thread, sew the two joining bits of piping together to finish!



That's all there is to it!

Do you collect anything from your trips/travels?

Love Rebecca

Image Map

9 comments:

  1. What a brilliant idea!! Such a great way yo display them all

    And thanks for the tips on how to sew piping - I have been battling it for years and although it can turn out well, it's always been hit & miss! Now I know how to do it it'll be a lot easier

    ReplyDelete
  2. Great idea again. I've never done a piped edge because I haven't had the confidence. This tutorial is so clear, I think I could try it at some point. Consider yourself pinned!

    Rosie xo

    ReplyDelete
  3. This is so pretty! And thanks for the tutorial on the piping!

    ReplyDelete
  4. This is such a great idea! I love love love it. :) I have only ever made a couple of pillow covers, I have mostly quilty stuff on my blog, but occasionally do some other sewing, too. Thanks for showing us how you did it! :) Popping in from Project Inspire. Have a great weekend.
    xo
    Kelli

    ReplyDelete
  5. I am glad you like the idea and could find a use for it! Hmmmm trophy plaques! Not sure on that one I am afraid!

    ReplyDelete
  6. This is amazing creative work. I appreciated your sewing idea for DIY. I really love your blog. You always come up with new ideas.

    Thanks for sharing!
    where to find embroidery patches
    where to find back patches

    ReplyDelete

Thank you so much for visiting Heron's Crafts! I love receiving your comments - and try to answer to all comments received by email! Have a great day!

Related Posts Plugin for WordPress, Blogger...